The content is just an excerpt from the complete note for JSS1 First Term Basic Technology Lesson Note – Ceramic and Glass. Check below to download the complete PDF

 WEEK: 9

TOPIC: CERAMIC AND GLASS

SUB-TOPIS:

  • Ceramics
  • Glass

Content Development (NOTES FOR FIRST LESSON/PERIOD ONE)

Sub Topic 1: Ceramics

Clay exists naturally in many parts of the world. When it is wet, it can easily be molded into different shapes and sizes.  We use clay to mould various objects like storage pots, cooking pots and dishes.

We use mud to construct support for cooking pots, to build houses and also to make bricks for building houses.  We make cement blocks that we use for building houses by mixing sand and cement to get typical shape.  All the above solid objects made from clay, mud or cement is called ceramics.

Ceramics break easily when dropped. We say they are brittle; this differentiates ceramics from metals, plastics, wood and rubber.  Ceramics are less dense than most metals. Ceramics have high melting points.

They are a very large group and have very wide uses such as:

  1. Refractory ceramics (high temperature bricks) for furnaces and flue linings.
  2. Tiles, such as roof tiles, glazed and unglazed floor and wall tiles, including white tiles.
  3. Sanitary fittings of all kinds usually known as white ware
  4. Common brick to high grade engineering brick used for the construction of machinery bases. Basically, they are of:
    1. Structural clay products, including common bricks and sewer bricks. These products are dried and fired for strength after being made from a mixture of clay and shale.
    2. White ware, commonly applied to glazed and unglazed sanitary ware, floor tiles, wall tiles, and ceramics for electrical purposes for low and high voltage.
    3. Refractories are ceramics that can withstand very high temperatures and some other conditions such as abrasion and chemical shock. They are made from fired clay and are used for such purposes as furnace linings and flues.
SEE ALSO  SS2 Third Term Physics Lesson Note – Light Waves

Classification of Ceramic materials

Ceramic materials are classified based on the types of materials used in making them. They are:

To gain full access to the note: DOWNLOAD FILE

Copyright warnings! Do not copy.