by Sunday | Oct 6 | NABTEB QUESTIONS
(i) To relieve internal stresses (ii) To soften the material
by Sunday | Oct 6 | NABTEB QUESTIONS
(i) Tempering is often called drawing or drawing the temper. It is heat treatment process which relieves internal strain in hardened steel and this increases it toughness. Steel can be tampered by heating it to a temperature below the lower critical temperature and...
by Sunday | Oct 6 | NABTEB QUESTIONS
The three types of taps are: 1. Taper tap 2. Plug tap 3. Bottoming tap To produce an internal thread, the taper tap is the first tap to be used because of its ease in entering the hole to commence the threading. Followed by the plug tap and finally the bottoming tap...
by Sunday | Oct 6 | NABTEB QUESTIONS
The tool used to produce both internal and external thread on the bench are: – Tap and die respectively – Tap for internal thread – Die for external thread
by Sunday | Oct 6 | NABTEB QUESTIONS
Cutting a piece of metal with a hacksaw (1) The work piece must be squarely fixed to the bench vice. (2) The saw bench must be fixed squarely and the teeth pointing forward with at least 3 teeth of the saw blade resting on the work piece. Filling a piece of metal with...
by Sunday | Oct 6 | NABTEB QUESTIONS
1. Apron 2. Gloves 3. Goggles or shield 4. Helmet 5. Safety boots 6. Overall