The website has the complete lesson note for all the subjects in secondary school but this piece showcases the JSS3 Basic Technology Lesson Note on Simple Electrical Wiring. You can use the website search button to filter out the subject of interest to you.

CLICK HERE to download the complete Document: DOWNLOAD HERE

TOPIC: SIMPLE ELECTRICAL WIRING

SUB-TOPICS:

ELECTRICAL CIRCUIT

  • Meaning of electrical circuit and types
  • Wiring tools and materials

Content Development (NOTES FOR FIRST LESSON/PERIOD ONE)

Sub-Topic 1:    Meaning of electrical circuit and types.

An electric circuit is a system that consists of the load, source of electricity, the key or switch and the connecting wires.

There are two types of electrical circuits (i) Series circuit and (ii) parallel circuit.

Series circuit: In this arrangement, the load (resistors) is connected end to end. The same current flows through all appliances. If one stops functioning, the others stop.

Parallel circuit:  In this arrangement, the load(resistors) are connected side by side in parallel order. The same voltage is used. A fault which may occur in one electrical path will not affect the others.

Evaluation

  • What is an Electrical circuit?
  • Differentiate between series circuits and parallel circuits.

Content Development (NOTES FOR SECOND LESSON/PERIOD TWO)                              

Wiring tools and materials

Electrical wiring is an arrangement whereby electrical loads are connected to the mains supply. A good wiring protects the user from electric shock and prevents fire outbreak.

Wiring tools are tools used for wiring and installation of circuits in homes, offices and other building structures and equipment.

SEE ALSO  JSS1 Third Term Christian Religious Knowledge (CRK) Lesson Note – Relationship in The Community
Wiring tool                          Uses
Pliers Used for cutting cables and twisting together wire ends
Screw driver Used for tightening screws to wooden blocks and fixing electrical accessories in position
Clips They are used to fasten electrical cables to the wall or ceiling.
Hammer It is used to drive nails through clips into the wall.
Mallet It is used to straighten out hunches in wires during surface wiring.
Drilling machine It is an electrically power machine used for making holes in walls or wooden blocks.
Screws and nails

Tester                                            

Cable

                       

They are used to hold the cable and electrical accessories in position.

It is used to check where live current flows in the circuit.

It is the insulated wire that provides electrical connection between the electrical load and the supply point.

Click on the Downloadable Button to get the FULL NOTE

Copyright warnings! Do not copy.